Kinesys Pinouts
MIL10
| MIL10 Pinout | ||
|---|---|---|
| A | E-Stop A1 | |
| B | E-Stop A2 | |
| C | E-Stop B1 | |
| D | E-Stop B2 | |
| E | DMH A1 | |
| F | DMH A2 | |
| G | ||
| H | ||
| I | ||
| J | ||
Elevation+ XLR7
| XLR7 Pinout with ProPlex PC226T | ||
|---|---|---|
| 1 | Data Gnd (shield) | |
| 2 | Data - | |
| 3 | Data + | |
| 4 | 24 V | |
| 5 | 0 V | |
| 6 | E-Stop | |
| 7 | Enable (24 V) | |
Elevation+ Encoder XLR6
| XLR6 Pinout | ||
|---|---|---|
| 1 | Data Gnd (shield) | |
| 2 | Data - | |
| 3 | ||
| 4 | Data - | |
| 5 | ||
| 6 | Shield, Gnd, 0 V | |
Libra
| XLR4 Pinout with PC-CCT CABLE | ||
|---|---|---|
| 1 | 0 V | |
| 2 | Data - | |
| 3 | Data + | |
| 4 | 24 V | |
| Shell | Gnd (screen) | |
Socapex 22
| Socapex 22 Pin | ||
|---|---|---|
| 1 | E-Stop 1A | |
| 2 | E-Stop 1B | |
| 3 | E-Stop 2A | |
| 4 | E-Stop 2B | |
| 5 | E-Stop Trace (24 V) | |
| 6 | E-Stop Trace | |
| 7 | Start | |
| 8 | Drive Power Control | |
| 9 | Drive Enable Control | |
| 10 | Drives On | |
| 11 | Drives Enabled | |
| 12 | E-Stop NC Feedback | |
| 13 | E-Stop NC Feedback | |
| 14 | E-Stop Ok | |
| 15 | 24 V | |
| 16 | 0 V | |
| 17 | DMH 1A / Int ES 1A | |
| 18 | DMH 1B / Int ES 1B | |
| 19 | DMH 2A / Int ES 2A | |
| 20 | DMH 2B / Int ES 2B | |
| 21 | ||
| 22 | 0 V | |