All public logs

Jump to navigation Jump to search

Combined display of all available logs of WLPS Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 18:56, 11 December 2023 Wodie talk contribs created page VOTER-Simulcasting (Created page with "= Introduction = Simulcasting is a means by where you operate multiple '''transmitters''' on the same frequency, at the same time, in diverse geographic locations, sending the same data/information. In doing so, you realize a number of advantages: *Improved coverage area *Improved signal strength/field strength at the subscriber receivers *Better spectrum utilization *Increased (transmitter) redundancy While the above are all great achievements, building a properly...")
  • 18:55, 11 December 2023 Wodie talk contribs created page RTCM Channel Driver (Created page with "= Introduction = The <code>chan_voter</code> channel driver is the interface between Asterisk and the RTCM/VOTER radio/repeater hardware interface. It allows receiver voting, simulcast transmitters, or just a plain repeater interface when used with the appropriate hardware. This page will document configuring the channel driver, done through <code>voter.conf</code>, as well as some common issues and more obscure features that may not be widely known. = B...")
  • 18:54, 11 December 2023 Wodie talk contribs created page Voter.conf file (Created page with "= Introduction = This file sets up the <code>chan_voter</code> channel driver to interface with <code>app_rpt</code>. Remember, in <code>rpt.conf</code>, you will need a directive to use the <code>chan_voter</code> channel driver: <pre> rxchannel = Voter/1999 </pre> The ''1999'' should match the corresponding ''instance'' stanza defined in <code>voter.conf</code> that holds all the definitions for your clients. The VOTER/RTCM may be used in any of 3 modes: *non...")
  • 18:53, 11 December 2023 Wodie talk contribs created page Voter.conf (Created page with "= Introduction = This file sets up the <code>chan_voter</code> channel driver to interface with <code>app_rpt</code>. Remember, in <code>rpt.conf</code>, you will need a directive to use the <code>chan_voter</code> channel driver: <pre> rxchannel = Voter/1999 </pre> The ''1999'' should match the corresponding ''instance'' stanza defined in <code>voter.conf</code> that holds all the definitions for your clients. The VOTER/RTCM may be used in any of 3 modes: *non...")
  • 18:52, 11 December 2023 Wodie talk contribs created page VOTER-GPS (Created page with "= Introduction = This page will outline the requirements and troubleshooting for using a GPS with the RTCM/VOTER. = GPS = The RTCM/VOTER will work with most GPS available. It requires either NMEA or Trimble TSIP binary data. It only receives data '''from''' the GPS (GPS TX), it does not send anything '''to''' the GPS. '''If you are planning on doing voting and/or simulcast, your GPS also needs to have a "Pulse-per-second" (PPS) output.''' The RTCM/VOTER firmware...")
  • 18:51, 11 December 2023 Wodie talk contribs created page VOTER-Audio (Created page with "= Introduction = Audio is critical component of proper VOTER/RTCM operation, as well as node operation in general. This is an extensive topic, with lots of caveats. So, we will lay it all out here. Before we get in to the different ways audio is routed, there is an important consideration you need to make if you are using the RTCM/VOTER for voting. The way the voting process works, it needs '''discriminator audio''' to determine the signal to noise level from each...")
  • 18:51, 11 December 2023 Wodie talk contribs created page RTCM Firmware upgrading (Created page with "Category:How to = Introduction = The firmware in the RTCM and VOTER is the same, except it is compiled for the specific dsPIC that is installed in each. As such, the firmware is specific to the VOTER or the RTCM, and is '''NOT''' interchangeable (it '''won't''' boot in the wrong device). Firmware specific for the RTCM is denoted by '''-smt''' in the filename. The VOTER uses a ''dsPIC33FJ128GP802'' and the RTCM uses a ''dsPIC33FJ128GP804''. There is different perip...")
  • 18:50, 11 December 2023 Wodie talk contribs created page VOTER-Menus (Created page with "= Introduction = Both the VOTER and the RTCM run the same (similar) firmware. The menus are consistent between them both. This page ''should'' be consistent with the current options available in the current firmware. '''BE AWARE''' there are some settings that take effect ''immediately'', and others that require you to save settings to EEPROM (99) and reboot (r) for them to take effect. If you are not getting the expected results, this may be the cause. Try a 99 and...")
  • 18:50, 11 December 2023 Wodie talk contribs created page RTCM Client (Created page with "= Introduction = The Radio Thin Client Module (RTCM) is [http://www.micro-node.com/thin-m1.shtml commercially available] hardware for interfacing radios to an AllStarLink computer. <gallery mode=nolines> File:Rtcm2-750.jpg File:Rtcm1-750.jpg File:Rtcm3-750.jpg </gallery> The Micro-Node RTCM (and VOTER) interfaces are typically used with AllStar in voting/simulcast applications. They '''MAY''' be used for '''ANY''' repeater interface application, t...")
  • 18:49, 11 December 2023 Wodie talk contribs created page VOTER-Hardware (Created page with "= Introduction = This is the documentation page to support the through-hole implementation of the VOTER Hardware. <gallery mode=nolines> File:1599px-Voter-assy-trim.png File:Voterr-reva.jpg </gallery> See the VOTER page for more information on the background/history. If you have bought or built a through-hole VOTER, this page is for you. If you have an [http://www.micro-node.com/thin-m1.shtml RTCM], then you will want to reference the [http://173.248.148.139/uno...")
  • 18:49, 11 December 2023 Wodie talk contribs created page VOTER (Created page with "'''VOTER''' '''V'''oice '''O'''bserving '''T'''ime '''E'''xtension for '''R'''adio = Introduction = The VOTER (Voice Observing Time Extension for Radio) system was originally created by Jim Dixon, W6BIL (SK). In many two-way radio applications, both for repeater systems and simplex base-stations, it is often difficult to have reliable reception when there is signal impairment due to terrain or other obstacles. One common way to solve this problem is by use of a v...")
  • 14:40, 30 November 2023 Wodie talk contribs moved page Reglas repetidores y enlaces to Reglas para repetidores y enlaces without leaving a redirect
  • 20:52, 29 November 2023 Wodie talk contribs created page Reglas repetidores y enlaces (Created page with " = My stuff, my rules = Here you will find the rules and policies for using my repeaters, bridges and nodes. If you do not follow them, you will be blacklisted. That simple. As the owner, I reserve the right to forbid the use of any repeaters, bridges, remote bases or voice over internet protocol by anyone who repeatedly violates these rules, or anyone who facilitates or encourages others to violate these rules. = Calling another station format = A user should call an...")
  • 15:05, 29 November 2023 Wodie talk contribs created page Enlace Regional PTTLink (Created page with "Con el fin mejorar la comunicación entre radioaficionados en la CDMX y estados colindantes, se han instalado varios repetidores enlazados por PTTLink.")
  • 17:41, 24 November 2023 Wodie talk contribs created page Configurar DVSwitch Mobile (Created page with "Descarga la App '''DVSwitch Mobile''' en tu celular (Android) desde '''Play Store'''. Ejecuta la App y presiona '''Accounts''' luego presiona una línea que diga '''EMPTY'''. Ingresa los siguientes valores: <pre> Protocol = IAX2 Hostname = tu número denodo.nodes.pttlink.org Port = 4569 Username = iaxclient Password = tu contraseña CallerID = Tu distintivo de llamada CallerNumber = Node = tu número de nodo Activa Phone mode IAX2 connection Codec Types = Server Selec...")
  • 17:21, 24 November 2023 Wodie talk contribs moved page Configurar DVSwitch Mobile to Configurar IAX Client para usar DV Switch without leaving a redirect
  • 12:37, 24 November 2023 Wodie talk contribs moved page DIU3000 interphase to DIU3000 interface without leaving a redirect
  • 12:33, 24 November 2023 Wodie talk contribs moved page DIU 3000 interphase to DIU3000 interphase without leaving a redirect
  • 21:38, 10 November 2023 Wodie talk contribs created page Echolink.conf - Echolink Channel Driver (Created page with "The chan_echolink channel driver allows PTTLink nodes to register on and communicate with the EchoLink network. The following information is originally from [http://docs.allstarlink.org/drupal/node/12 echolink.conf]. =Enable the Channel Driver= In /etc/asterisk/modules.conf, you will first need to enable the channel driver load => chan_echolink.so A asterisk restart would be required, but continue to set-up your /etc/asterisk/echolink.conf =Connecting to Echolink=...")
  • 18:14, 10 November 2023 Wodie talk contribs moved page Entrevista a Juan Carlos to Entrevista without leaving a redirect
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wodielite.com/wiki/index.php/Special:Log/Wodie"