PTTLink Tips: Difference between revisions
Jump to navigation
Jump to search
m (→Analog_Bridge) |
|||
| Line 47: | Line 47: | ||
== Analog_Bridge == | == Analog_Bridge == | ||
<pre> | |||
usrpAudio = AUDIO_USE_AGC ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) | usrpAudio = AUDIO_USE_AGC ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) | ||
usrpGain = 5.00 ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY) | usrpGain = 5.00 ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY) | ||
| Line 52: | Line 53: | ||
tlvAudio = AUDIO_USE_GAIN ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF) | tlvAudio = AUDIO_USE_GAIN ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF) | ||
tlvGain = 0.15 ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY) | tlvGain = 0.15 ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY) | ||
</pre> | |||
Latest revision as of 12:34, 24 November 2023
Test NodeNames file
sudo nano /var/lib/asterisk/rpt_extnodes
Motorola MTR2000
This settings are considered using a DMK Engineering URIxB interface.
Set Rx Wireline Level to 0 dBm.
Set Tx Wireline Level to 0 dBm.
Nano-Node Levels
- Set Rx Level to 100 on Nano-Node.
- Set Tx Level to 100 on Nano-Node.
- Set Rx Level to 705 for URIxB in simpleusb_tune_usb_xxxxx.conf.
- Set Tx Level to 705 for URIxB in simpleusb_tune_usb_xxxxx.conf.
MTM 5400 Levels
- Set Rx Voice Level to 200.
- Set Transmit A Level to 500.
URIxB connected to a DIU3000 Levels
carrierfrom = usbinvert ctcssfrom = no invertptt = 0 duplex = 0
[usb_55055] ; name=usb_55050 ; devicenum=1 devstr=1-1.3:1.0 rxmixerset=500 txmixaset=700 txmixbset=500
PTTLink to DMR Plus Audio Settings
Analog_Bridge
usrpAudio = AUDIO_USE_AGC ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) usrpGain = 5.00 ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY) usrpAGC = -20,16,100 ; Set the agc threshold (db), slope (db) and decay (ms) tlvAudio = AUDIO_USE_GAIN ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF) tlvGain = 0.15 ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)