PTTLink Tips: Difference between revisions
Tag: Manual revert |
mNo edit summary |
||
| Line 56: | Line 56: | ||
Regresar a [[Radioafición | Regresar a [[Radioafición]] | ||
Revision as of 05:54, 5 February 2023
Test NodeNames file
sudo nano /var/lib/asterisk/rpt_extnodes
Audio Level Settings
On your MTR-2000
This settings are considered using a DMK Engineering URIxB interface.
Set Rx Wireline Level to 0 dBm.
Set Tx Wireline Level to 0 dBm.
On your PTTLink node
This settings are considered using a DMK Engineering URIxB interface.
Set Rx Voice Level to 950.
Set Transmit A Level to 999.
On your Nano-Node
Set Rx Level to 95.
Set Tx Level to 99.
On your MTM 5400
Set Rx Voice Level to 200.
Set Transmit A Level to 500.
For your URIxB connected to a DIU 3000
Set Rx Voice Level to 500.
Set Transmit A Level to 700.
Regresar a Radioafición en Español
PTTLink to DMR Plus Audio Settings
Analog_Bridge
usrpAudio = AUDIO_USE_AGC ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) usrpGain = 5.00 ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY) usrpAGC = -20,16,100 ; Set the agc threshold (db), slope (db) and decay (ms) tlvAudio = AUDIO_USE_GAIN ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF) tlvGain = 0.15 ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)
Regresar a Radioafición