PTTLink Tips: Difference between revisions

From WLPS Wiki
Jump to navigation Jump to search
Line 31: Line 31:
== On your MTM 5400 ==
== On your MTM 5400 ==


Set Rx Level to 200.
Set Rx Voice Level to 200.


Set Tx Level to 500.
Set Transmit A Level to 500.


== For your URIxB connected to a DIU 3000 ==
== For your URIxB connected to a DIU 3000 ==
Line 39: Line 39:
Set Rx Voice Level to 500.
Set Rx Voice Level to 500.


Set Tx A Level to 700.
Set Transmit A Level to 700.





Revision as of 18:27, 2 September 2022

Test NodeNames file

sudo nano /var/lib/asterisk/rpt_extnodes

Audio Level Settings

On your MTR-2000

This settings are considered using a DMK Engineering URIxB interface.

Set Rx Wireline Level to 0 dBm.

Set Tx Wireline Level to 0 dBm.

On your PTTLink node

This settings are considered using a DMK Engineering URIxB interface.

Set Rx Voice Level to 950.

Set Transmit A Level to 999.

On your Nano-Node

Set Rx Level to 95.

Set Tx Level to 99.

On your MTM 5400

Set Rx Voice Level to 200.

Set Transmit A Level to 500.

For your URIxB connected to a DIU 3000

Set Rx Voice Level to 500.

Set Transmit A Level to 700.


Regresar a Radioafición en Español

PTTLink to DMR Plus Audio Settings

Analog_Bridge

usrpAudio = AUDIO_USE_AGC  ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) usrpGain = 5.00  ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY) usrpAGC = -20,16,100  ; Set the agc threshold (db), slope (db) and decay (ms) tlvAudio = AUDIO_USE_GAIN  ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF) tlvGain = 0.15  ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)


Regresar a Radioafición en Español