PTTLink Tips: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (→Analog_Bridge) |
||
| (21 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
= | =Test NodeNames file = | ||
= | <pre> | ||
sudo nano /var/lib/asterisk/rpt_extnodes | |||
</pre> | |||
= Motorola MTR2000 = | |||
This settings are considered using a DMK Engineering URIxB interface. | This settings are considered using a DMK Engineering URIxB interface. | ||
| Line 9: | Line 13: | ||
Set Tx Wireline Level to 0 dBm. | Set Tx Wireline Level to 0 dBm. | ||
== | = Nano-Node Levels = | ||
* Set Rx Level to 100 on Nano-Node. | |||
* Set Tx Level to 100 on Nano-Node. | |||
* Set Rx Level to 705 for URIxB in simpleusb_tune_usb_xxxxx.conf. | |||
* Set Tx Level to 705 for URIxB in simpleusb_tune_usb_xxxxx.conf. | |||
= MTM 5400 Levels = | |||
* Set Rx Voice Level to 200. | |||
* Set Transmit A Level to 500. | |||
= URIxB connected to a DIU3000 Levels = | |||
<pre> | |||
carrierfrom = usbinvert | |||
ctcssfrom = no | |||
invertptt = 0 | |||
duplex = 0 | |||
</pre> | |||
<pre> | |||
[usb_55055] | |||
; name=usb_55050 | |||
; devicenum=1 | |||
devstr=1-1.3:1.0 | |||
rxmixerset=500 | |||
txmixaset=700 | |||
txmixbset=500 | |||
</pre> | |||
= | = PTTLink to DMR Plus Audio Settings = | ||
== Analog_Bridge == | |||
Set | <pre> | ||
usrpAudio = AUDIO_USE_AGC ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) | |||
usrpGain = 5.00 ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY) | |||
usrpAGC = -20,16,100 ; Set the agc threshold (db), slope (db) and decay (ms) | |||
tlvAudio = AUDIO_USE_GAIN ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF) | |||
tlvGain = 0.15 ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY) | |||
</pre> | |||
Latest revision as of 12:34, 24 November 2023
Test NodeNames file
sudo nano /var/lib/asterisk/rpt_extnodes
Motorola MTR2000
This settings are considered using a DMK Engineering URIxB interface.
Set Rx Wireline Level to 0 dBm.
Set Tx Wireline Level to 0 dBm.
Nano-Node Levels
- Set Rx Level to 100 on Nano-Node.
- Set Tx Level to 100 on Nano-Node.
- Set Rx Level to 705 for URIxB in simpleusb_tune_usb_xxxxx.conf.
- Set Tx Level to 705 for URIxB in simpleusb_tune_usb_xxxxx.conf.
MTM 5400 Levels
- Set Rx Voice Level to 200.
- Set Transmit A Level to 500.
URIxB connected to a DIU3000 Levels
carrierfrom = usbinvert ctcssfrom = no invertptt = 0 duplex = 0
[usb_55055] ; name=usb_55050 ; devicenum=1 devstr=1-1.3:1.0 rxmixerset=500 txmixaset=700 txmixbset=500
PTTLink to DMR Plus Audio Settings
Analog_Bridge
usrpAudio = AUDIO_USE_AGC ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) usrpGain = 5.00 ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY) usrpAGC = -20,16,100 ; Set the agc threshold (db), slope (db) and decay (ms) tlvAudio = AUDIO_USE_GAIN ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF) tlvGain = 0.15 ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)