Beginners Guide ASL-AsteriskNG: Difference between revisions

From WLPS Wiki
Jump to navigation Jump to search
 
(3 intermediate revisions by the same user not shown)
Line 15: Line 15:
While you are awaiting the verification of your account (usually within 24 hours) you may download one of the image files for you computer system you will use to run your PTTLink node.
While you are awaiting the verification of your account (usually within 24 hours) you may download one of the image files for you computer system you will use to run your PTTLink node.


Go to [[Main_Page#Downloads|wiki.pttlink.org]] scroll down to the Downloads section and select the appropriate image for the type of system you will use.
Only Beta testers have access to the Beta downloads and files. You need to join as a Beta tester to have aces to files.
 
[[File:Ptt download.png|none|thumb]]


Write the image file to media. Either a USB memory stick, CD or DVD, or a microSD card (Raspberry Pi).
Write the image file to media. Either a USB memory stick, CD or DVD, or a microSD card (Raspberry Pi).

Latest revision as of 17:22, 23 March 2021

PTTLink for beginners.

The first step is to create an account.

Go to https://pttlink.org/ and click on the <Login/Sign Up> link.

Next click the <Sign Up> link.

Download PTTLink image file

While you are awaiting the verification of your account (usually within 24 hours) you may download one of the image files for you computer system you will use to run your PTTLink node.

Only Beta testers have access to the Beta downloads and files. You need to join as a Beta tester to have aces to files.

Write the image file to media. Either a USB memory stick, CD or DVD, or a microSD card (Raspberry Pi).

Login to your account

You will need to login to your account at https://PTTLink.org/

Click on <Login/Sign Up> as shown in the image above.

Create a Server

You will need to create a "server" : Click on <Portal> then <Server Settings>.

Click on <Add a new server>.

Please take the time to read the instructions on each page.

Then click <Proceed with Server Setup> if needed.

Fill in all of the information and click <Submit> at the bottom of the page.

Request a Node number

At the top of the page, click <Portal> and then on <Node Settings>.

Then click <Continue...>.

Then click <Request>.

Select which server you would wish to have a node number assigned to.

A comment of 'additional node on same server' would be appropriate if you are requesting a second node number.

Once your node number request(s) are processed you will receive an email.

Edit Node settings

Log into your account on https://pttlink.org/

Click <Portal> then <Node settings>.

The PTTLink node numbers that have been assigned to you are displayed here.

Select which node you wish to view/edit.

Fill in the information for you node and click <Submit>.

Write down your node number, password and the call sign you assigned for the node as you will use them to configure your PTTLink system.

Install and configure PTTLink to your computer

Consult your owners manual or your favorite internet search engine for how to install an image for your computer system.

Install the PTTLink disk image to your computer. Insert the appropriate media for your system and boot the computer.

When the login prompt appears enter the user ID of repeater and press <Enter>.

Enter the default password of pttlink

Follow the on screen instructions for the initial password change.

For users familiar with the linux operation system you may proceed to edit the system manually.

For users not familiar with linux and PTTLink, at the Linux CLI (command line interface)

Type sudo ptt-menu as the example below shows.

sudo ptt-menu

This will load the PTTLink configuration menu.

PTTLink software setup

Choose option <1>.

Setup now will ask you to change "repeater" account password. Do not forget to write it down and keep it safe.

Next, cause it is your first time setup, answer <Yes> so you can setup a "root" password. Don't forget to write down your user and password.

Now let's set time zone <Ok>.

Choose the node's continent.

Choose the node's city.

Next you can change the name of you host name, the default is rpi4.

Type the new host name and hit <Enter>.

If you want to set up a domain, type it and hit <Enter>.

Say <Ok> to this message.

Now you can make your network settings <Ok>.

Just say <Ok> to this message.

To choose between DHCP or Static IP say <Yes>.

Use <D> for DHCP or <S>. for Static, if you choose Static, you will be asked to enter it next, for this example DHCP is in use.

Just say <Ok> to this message.

As you already selected DHCP now select <Back> to continue.

Just say <Ok> to this message.

Just say <Ok> to this message.

Choose option <A1>.

Choose option <N1>.

Type the node number for your node. Yes the one you previously wrote down from PTTLink site.

Choose option <N2>.

Type the node password for your node. Yes the one you previously wrote down from PTTLink site.

Choose option <N3>.

Type the call sign for your node. Yes the one you previously wrote down from PTTLink site.

Choose option <N4>.

Choose option <I1>.

Just say <Ok> to this message.

Choose option <N5>.

If your node will be a simplex node type <1>. If your node is a repeater controller type <2>.

Choose option <N6>.

Type a new password, this will be used to have access from the nodes web site Allmon2, the default password is 'llcgi'.

Just say <Ok> to this message.

Just say <Ok> to this message.

Choose option <N9>.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Choose option <Back>.

Choose option <AZ>.

Review what you wrote down with what you have configured on your system and press <Enter>.

Choose <Yes> to backup your configuration.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Choose option <Exit>.

Answer <Yes>, because we already saved our configuration.

If you want to automatically start your system with this menu answer <Yes>, if not then <No>.

If you answer was <No>, remember you can come back to this menu typing sudo ptt-menu as the following example:

sudo ptt-menu

Now your node will reboot to apply all the changes we have done, so say <Ok>.

PTTLink Audio settings with SimpleUSB

type sudo ptt-menu like the example bellow:

sudo ptt-menu

Choose option <4>.

With option <F>, will trigger PTT few times on your radio for testing, you should also listen a test tone.

Next, with option <2>, you can adjust the audio levels from your radio to your node node with the aim of an on-screen level meter.

With another radio transmit a test tone or voice and type values between 0 and 999 followed by <Enter> to apply them, if you do not set any value and hit <Enter>, you will exit this function keeping the last typed value on RAM.

Next, type option <T>, you can toggle a tone generator to adjust your node to radio audio levels, so type it once to turn it on.

Now typing option <3>, will allow you to adjust the audio from your node to your Tx radio.

To achieve that, you can type values between 0 and 999 and press <Enter> to apply the new value. The system will Tx a test tone for 5 seconds. If you do not set any value and hit <Enter>, you will exit this function keeping the last typed value on RAM.

Do not forget to turn off the tone generator by pressing once again <T>.

Once you are happy with your settings, type <W> and <Enter>.

To exit from this menu type <0> (zero) and hit <Enter>.

PTT and COS polarity settings

If your radio, need PTT and/or COS/CTCSS polarity to be inverted go to the mail PTTLink menu and choose option <6>.

Choose option <I>.

You will be logger to a text file where you will need to find and edit some values:

PTT invert:

Search for the line beginning with invertptt = and change its value as follows:

0 = Ground to Transmit.

1 = Open to Transmit.

COS/CTCSS invert:

Search for the line beggining with carrierfrom = and change its value as follows.

Search for the line beggining with ctcssfrom = and change its value as follows.

no = No carrier detection at all.

usb = Cor line active Hi.

usbinvert = Cor line active Low.

After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.

Choose option <R> to restar PTTLink software and apply changes.

Port forwarding

You will need to forward port 4569 on your ISP modem. As there are many brands and modems, it is not possible to show a step to step guide.

At this point your node should be up and running.

Allmon2 Setup.

Allmon2 web control.

TBD

DTMF control.

TBD