Allmon2 Install: Difference between revisions

From WLPS Wiki
Jump to navigation Jump to search
(Created page with "Allmon2 Install. == Allmon2 Install. == The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using S...")
 
 
(9 intermediate revisions by the same user not shown)
Line 11: Line 11:
Once you are there you have to type the following commands:
Once you are there you have to type the following commands:


  repeater@repeater:~$ sudo apt update
  sudo apt update
  repeater@repeater:~$ sudo apt install apache2 -y
  sudo apt install apache2 -y
  repeater@repeater:~$ sudo apt install php libapache2-mod-php -y
  sudo apt install php libapache2-mod-php -y
  repeater@repeater:~$ sudo apt install git
  sudo apt install git -y
  repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
  sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
  repeater@repeater:~$ cd /var/www/html/allmon2
  cd /var/www/html/allmon2
  repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
  sudo mv allmon.ini.txt allmon.ini.php
  repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
  sudo mv controlpanel.ini.txt controlpanel.ini.php


==  Allmon2 Configuration.  ==


Now you have to edit the allmon.ini.php file:


== Allmon2 Configuration. ==
  cd /var/www/html/allmon2
sudo nano allmon.ini.php


Now you have to edit the allmon.ini.php file:
Search for the stanza [500] and change 500 to your node number i.e. [12345]


[12345]


repeater@repeater:~$ cd /var/www/html/allmon2
Change the following lines for your node stanza.
repeater@repeater:~$ sudo nano allmon.ini.php


  # Change: the '500' number [500] to your node number.
  host=127.0.0.1:5038
# Change: host=127.0.0.1:5038
  user=admin
  # Change: passwd=yourpassword
passwd=yourpassword
  # (note: 'llcgi' is the default password according to the initial node setup)
  nomenu=no
  # Change: menu=yes
hideNodeURL=no
  menu=yes


(note: 'llcgi' is the default password according to the initial node setup)


After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''.
After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''.


Next, type the following commands:
mv -f /var/www/html/allmon2/allmon.ini.php $WEBROOT/allmon2/allmon.ini.php.$DATEEXT 2>/dev/null #backup default
cp -f /usr/local/sbin/allmon.ini.php /var/www/html/allmon2/allmon.ini.php 2>/dev/null #copy what node-setup script created


  repeater@repeater:~$ sudo htpasswd -cB /var/www/html/allmon2/.htpasswd admin
  sudo htpasswd -cB /var/www/html/allmon2/.htpasswd admin


Next you have to type twice your password (note: 'llcgi' is the default password according to the initial node setup).
Next you have to type twice your password (note: 'llcgi' is the default password according to the initial node setup).
Line 48: Line 57:
yourpassword
yourpassword


  repeater@repeater:~$ sudo chmod 777 astdb.php
  sudo chmod 777 astdb.php


==  Allmon2 Test and Use.  ==
==  Allmon2 Test and Use.  ==
Line 54: Line 63:
Using your web browser go to:
Using your web browser go to:


http:192.168.x.x/allmon2


Note: 192.168.x.x is your nodes IP.
Note: where 192.168.x.x is your node's IP.
 
http:192.168.x.x/allmon2


There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.

Latest revision as of 01:36, 28 February 2021

Allmon2 Install.

Allmon2 Install.

The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.


repeater@repeater:~$


Once you are there you have to type the following commands:

sudo apt update
sudo apt install apache2 -y
sudo apt install php libapache2-mod-php -y
sudo apt install git -y
sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
cd /var/www/html/allmon2
sudo mv allmon.ini.txt allmon.ini.php
sudo mv controlpanel.ini.txt controlpanel.ini.php

Allmon2 Configuration.

Now you have to edit the allmon.ini.php file:

cd /var/www/html/allmon2
sudo nano allmon.ini.php

Search for the stanza [500] and change 500 to your node number i.e. [12345]

[12345]

Change the following lines for your node stanza.

host=127.0.0.1:5038
user=admin
passwd=yourpassword
nomenu=no
hideNodeURL=no
menu=yes

(note: 'llcgi' is the default password according to the initial node setup)

After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.

Next, type the following commands:

mv -f /var/www/html/allmon2/allmon.ini.php $WEBROOT/allmon2/allmon.ini.php.$DATEEXT 2>/dev/null #backup default
cp -f /usr/local/sbin/allmon.ini.php /var/www/html/allmon2/allmon.ini.php 2>/dev/null #copy what node-setup script created
sudo htpasswd -cB /var/www/html/allmon2/.htpasswd admin

Next you have to type twice your password (note: 'llcgi' is the default password according to the initial node setup).

yourpassword

yourpassword

sudo chmod 777 astdb.php

Allmon2 Test and Use.

Using your web browser go to:

http:192.168.x.x/allmon2

Note: where 192.168.x.x is your node's IP.

There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.