Allmon2 Install: Difference between revisions

From WLPS Wiki
Jump to navigation Jump to search
(Created page with "Allmon2 Install. == Allmon2 Install. == The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using S...")
 
mNo edit summary
Line 11: Line 11:
Once you are there you have to type the following commands:
Once you are there you have to type the following commands:


  repeater@repeater:~$ sudo apt update
  sudo apt update
  repeater@repeater:~$ sudo apt install apache2 -y
  sudo apt install apache2 -y
  repeater@repeater:~$ sudo apt install php libapache2-mod-php -y
  sudo apt install php libapache2-mod-php -y
  repeater@repeater:~$ sudo apt install git
  sudo apt install git
  repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
  sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
  repeater@repeater:~$ cd /var/www/html/allmon2
  cd /var/www/html/allmon2
  repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
  sudo mv allmon.ini.txt allmon.ini.php
  repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
  sudo mv controlpanel.ini.txt controlpanel.ini.php




Line 26: Line 26:
Now you have to edit the allmon.ini.php file:
Now you have to edit the allmon.ini.php file:


 
  cd /var/www/html/allmon2
  repeater@repeater:~$ cd /var/www/html/allmon2
  sudo nano allmon.ini.php
  repeater@repeater:~$ sudo nano allmon.ini.php


  # Change: the '500' number [500] to your node number.
  # Change: the '500' number [500] to your node number.
Line 40: Line 39:




  repeater@repeater:~$ sudo htpasswd -cB /var/www/html/allmon2/.htpasswd admin
  sudo htpasswd -cB /var/www/html/allmon2/.htpasswd admin


Next you have to type twice your password (note: 'llcgi' is the default password according to the initial node setup).
Next you have to type twice your password (note: 'llcgi' is the default password according to the initial node setup).
Line 48: Line 47:
yourpassword
yourpassword


  repeater@repeater:~$ sudo chmod 777 astdb.php
  sudo chmod 777 astdb.php


==  Allmon2 Test and Use.  ==
==  Allmon2 Test and Use.  ==

Revision as of 18:14, 15 November 2020

Allmon2 Install.

Allmon2 Install.

The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.


repeater@repeater:~$


Once you are there you have to type the following commands:

sudo apt update
sudo apt install apache2 -y
sudo apt install php libapache2-mod-php -y
sudo apt install git
sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
cd /var/www/html/allmon2
sudo mv allmon.ini.txt allmon.ini.php
sudo mv controlpanel.ini.txt controlpanel.ini.php


Allmon2 Configuration.

Now you have to edit the allmon.ini.php file:

cd /var/www/html/allmon2
sudo nano allmon.ini.php
# Change: the '500' number [500] to your node number.
# Change: host=127.0.0.1:5038
# Change: passwd=yourpassword
# (note: 'llcgi' is the default password according to the initial node setup)
# Change: menu=yes


After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.


sudo htpasswd -cB /var/www/html/allmon2/.htpasswd admin

Next you have to type twice your password (note: 'llcgi' is the default password according to the initial node setup).

yourpassword

yourpassword

sudo chmod 777 astdb.php

Allmon2 Test and Use.

Using your web browser go to:


Note: 192.168.x.x is your nodes IP.

http:192.168.x.x/allmon2

There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.