PTTLink Tips: Difference between revisions
| Line 34: | Line 34: | ||
Set Tx Level to 500. | Set Tx Level to 500. | ||
== On your DIU 3000 == | |||
Set Rx Level to 500. | |||
Set Tx Level to 700. | |||
Revision as of 18:25, 2 September 2022
Test NodeNames file
sudo nano /var/lib/asterisk/rpt_extnodes
Audio Level Settings
On your MTR-2000
This settings are considered using a DMK Engineering URIxB interface.
Set Rx Wireline Level to 0 dBm.
Set Tx Wireline Level to 0 dBm.
On your PTTLink node
This settings are considered using a DMK Engineering URIxB interface.
Set Rx Voice Level to 950.
Set Transmit A Level to 999.
On your Nano-Node
Set Rx Level to 95.
Set Tx Level to 99.
On your MTM 5400
Set Rx Level to 200.
Set Tx Level to 500.
On your DIU 3000
Set Rx Level to 500.
Set Tx Level to 700.
Regresar a Radioafición en Español
PTTLink to DMR Plus Audio Settings
Analog_Bridge
usrpAudio = AUDIO_USE_AGC ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) usrpGain = 5.00 ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY) usrpAGC = -20,16,100 ; Set the agc threshold (db), slope (db) and decay (ms) tlvAudio = AUDIO_USE_GAIN ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF) tlvGain = 0.15 ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)
Regresar a Radioafición en Español