Mo-Sys StarTracker: Difference between revisions
Jump to navigation
Jump to search
m (→Advanced) |
m (→Lens Data) |
||
| Line 19: | Line 19: | ||
== Lens Data == | == Lens Data == | ||
* Enable - Turn On if using DigiLens. | |||
* Type - Select Wheels if using external encoders. | |||
* Load File - Only apply for Digilens. | |||
* Extender - Loads the Extender Menu. | |||
:For external encoders, only set the extender X factor. | |||
:Load Lens file only for DigiLens. | |||
* Reverse Encoders - Invert the encoders direction for Focus or Zoom. | |||
* Reverse Lens File - Invert the encoders direction for DigiLens Focus or Zoom. | |||
[[File:data_lensdata.jpeg|none|800x600]] | [[File:data_lensdata.jpeg|none|800x600]] | ||
Revision as of 17:26, 25 March 2021
Main
Alg
Calib
Mapping
Data
Output
Input
Record
Lens Data
- Enable - Turn On if using DigiLens.
- Type - Select Wheels if using external encoders.
- Load File - Only apply for Digilens.
- Extender - Loads the Extender Menu.
- For external encoders, only set the extender X factor.
- Load Lens file only for DigiLens.
- Reverse Encoders - Invert the encoders direction for Focus or Zoom.
- Reverse Lens File - Invert the encoders direction for DigiLens Focus or Zoom.
Network
Advanced
- F4 Status - On to send data to D3.
- F4 ST ID - On to be read properly on D3.
- Serial IO - Must be On for Gen Lock and Lens Encoders.
- Use IMU - Need to be on, so IR camera works.
