AllStarLink for TETRA Setup: Difference between revisions
Jump to navigation
Jump to search
(Created page with "TETRA for AllStarLink # Install sudo cpan install Switch Config::IniFiles Device::SerialPort IO::Socket::Timeout IO::Socket::Multicast JSON Ham::APRS::IS Term::ReadKey sudo apt-get install git-core sudo git clone https://github.com/WiringPi/WiringPi.git /opt/wiringpi cd /opt/wiringpi sudo ./build sudo cpan install RPi::Pin RPi::Const sudo apt install pigpio sudo systemctl start pigpiod sudo usermod -aG gpio asterisk # Service sudo cp /home/repeater/tetra_4_ASL/x_te...") |
mNo edit summary |
||
| Line 1: | Line 1: | ||
= Overview = | |||
TETRA for AllStarLink is a Perl application that allows use Motorola MTM5400 radios with AllStarLink, as MTM5400 have no DTMF tones and COS/COR GPO (VOX is not a reliable solution and there is no way to connect/disconnect without DTMF). | |||
= Initial Setup = | |||
== Install Perl libraries == | |||
<pre> | |||
sudo cpan install Switch Config::IniFiles Device::SerialPort IO::Socket::Timeout IO::Socket::Multicast JSON Ham::APRS::IS Term::ReadKey | sudo cpan install Switch Config::IniFiles Device::SerialPort IO::Socket::Timeout IO::Socket::Multicast JSON Ham::APRS::IS Term::ReadKey | ||
sudo apt-get install git-core | sudo apt-get install git-core | ||
| Line 14: | Line 17: | ||
sudo systemctl start pigpiod | sudo systemctl start pigpiod | ||
sudo usermod -aG gpio asterisk | sudo usermod -aG gpio asterisk | ||
</pre> | |||
== Install TETRA for AllStarLink == | |||
<pre> | |||
sudo gitclone https://github.com/Wodie/tetra_4_pttlink.git | |||
sudo mv tetra_4_pttlink tetra_4_ASL | |||
</pre> | |||
== User configuration == | |||
Edit the config file with your callsign and node settings. | |||
<pre> | |||
cd home | |||
cd tetra_4_ASL | |||
sudo nano config.conf | |||
</pre> | |||
After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. | |||
== Test GPIO == | |||
To test your GPIO pins use: | |||
<pre> | |||
watch raspi-gpio get 2-26 | |||
</pre> | |||
or | |||
<pre> | |||
gpio readall | |||
</pre> | |||
== Test == | |||
<pre> | |||
sudo perl tetra_4_ASL.pl | |||
</pre> | |||
If succesfully working press '''"Q"''' to quit and continue. | |||
== Install service == | |||
<pre> | |||
sudo cp /home/repeater/tetra_4_ASL/x_tetra_4_ASL.service /lib/systemd/system/tetra_4_ASL.service | sudo cp /home/repeater/tetra_4_ASL/x_tetra_4_ASL.service /lib/systemd/system/tetra_4_ASL.service | ||
</pre> | |||
== Start the service == | |||
<pre> | |||
sudo systemctl enable tetra_4_ASL | sudo systemctl enable tetra_4_ASL | ||
sudo systemctl start tetra_4_ASL | sudo systemctl start tetra_4_ASL | ||
<pre> | |||
== Service status == | |||
If you wqant to see service status type: | |||
<pre> | |||
sudo systemctl status tetra_4_ASL | sudo systemctl status tetra_4_ASL | ||
<pre> | |||
== Stop Service == | |||
If for some reson you need to stop the service, type: | |||
<pre> | |||
sudo systemctl stop tetra_4_ASL | sudo systemctl stop tetra_4_ASL | ||
sudo systemctl disable tetra_4_ASL | sudo systemctl disable tetra_4_ASL | ||
</pre> | |||
Revision as of 21:24, 14 June 2025
Overview
TETRA for AllStarLink is a Perl application that allows use Motorola MTM5400 radios with AllStarLink, as MTM5400 have no DTMF tones and COS/COR GPO (VOX is not a reliable solution and there is no way to connect/disconnect without DTMF).
Initial Setup
Install Perl libraries
sudo cpan install Switch Config::IniFiles Device::SerialPort IO::Socket::Timeout IO::Socket::Multicast JSON Ham::APRS::IS Term::ReadKey sudo apt-get install git-core sudo git clone https://github.com/WiringPi/WiringPi.git /opt/wiringpi cd /opt/wiringpi sudo ./build sudo cpan install RPi::Pin RPi::Const sudo apt install pigpio sudo systemctl start pigpiod sudo usermod -aG gpio asterisk
Install TETRA for AllStarLink
sudo gitclone https://github.com/Wodie/tetra_4_pttlink.git sudo mv tetra_4_pttlink tetra_4_ASL
User configuration
Edit the config file with your callsign and node settings.
cd home cd tetra_4_ASL sudo nano config.conf
After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>.
Test GPIO
To test your GPIO pins use:
watch raspi-gpio get 2-26
or
gpio readall
Test
sudo perl tetra_4_ASL.pl
If succesfully working press "Q" to quit and continue.
Install service
sudo cp /home/repeater/tetra_4_ASL/x_tetra_4_ASL.service /lib/systemd/system/tetra_4_ASL.service
Start the service
sudo systemctl enable tetra_4_ASL sudo systemctl start tetra_4_ASL <pre> == Service status == If you wqant to see service status type: <pre> sudo systemctl status tetra_4_ASL <pre> == Stop Service == If for some reson you need to stop the service, type: <pre> sudo systemctl stop tetra_4_ASL sudo systemctl disable tetra_4_ASL